Floating Snowman Snow Globe GCH

 Happy Thursday AI Friends!

Simon Says Stamp has an exclusive Art Impressions stamp set available only on the Simon Says Stamp website.  This set was just released Monday, November 17, 2025 and is available for a limited time only and once sold, it will be gone.  So, hurry up and get yours before they are gone.  You have to go see all of the cute samples!  Sooo many fun and different ways to use this set!

I made it as a tag/ornament with a gift card holder on the back.  Check out my video below to see how the snowman moves within the snow globe.

To make him float within the globe, I used invisible thread/fishing line and attached the body and hat to the string separately from each other.  

Glue the string to the back of the snowman's body.  Place a second die cut to his back over the string to secure it in place.  Position the hat over his head (DO NOT glue in place), making sure he fits nicely within the globe.  Glue the string to the back of the hat.  The hat should be held only by the string with the body dangling below on the same string.  Adhere a scrap piece of hat over the string to secure the string in place behind the hat.  At this point, the string should be the only thing holding the hat and snowman together.   Glue the end of the string between the globe layers.  Fill the globe and attach the acetate layer.  Decorate the outside of the snowglobe and attach a tag holder to the back between the globe and the gift card holder.  

Have fun watching the kiddos play with the snowglobe (if you are able to hand it over). ;)

Thanks for joining me today!  Make sure to grab your snowglobe from Simon Says Stamp before they are gone.  These exclusives go fast!

Hope you have a wonderful day!  Keep creating!

Spider Mania

 Happy Thursday AI Friends!

Halloween was never one of my favorite holidays, but now, with all of these cute sets from Art Impressions, it has climbed the ladder to second.  I can't seem to stop creating with all of these images and since Halloween is tomorrow, I thought I'd share two projects.  Both of these were inspired by the "Along Came A Spider" challenge currently on the blog.  

The card below is a pop up frame card.  Push the sides in and the frame pop ups and away from Frankie.  When the sides are pulled out, the card flattens to a 5 x 7 for mailing.  Frankie's legs also wiggle side to side as well as his eyes.  I used #6120 - Frankenstein Puppet, #5604 - Halloween Journal dies and the #5462 - Web dies set to create this card plus added a few sets of wiggle eyes (check out the little spidey on the left).  LOL!

To make the card, cut two pieces of 5 x 7" black cardstock.  Score both pieces at 1/2", 1", 6" and 6 1/2" along the 7" side.  For the front, fold one piece as valley, mountain, mountain and valley (V,M,M,V) and the back piece, fold just the opposite (M,V,V,M).  I recommend you decorate both pieces at this point so you can lay flat to glue decorations securely.  You can place Frankie inside the frame at the end to position him just where you want him.  Glue the front and back ends together with the 1/2" tabs on each side.

To make the dancing Frankie, cut all the pieces with the puppet die set, but hold up on the pants.  You will need to cut an extra shirt piece from scrap cardstock.  For the pants, you will need to stretch his legs.  To do this, you will need to partial cut the legs up to the top of his pants by placing your cutting plate just under the cut line (of the top of the pants) so that it won't cut.  Then free hand cut an additional 1/2" for the top of the pants (see below).  I also rounded off the top corners of his pants.  At the top of the pants (about 1/4" from top), punch a hole big enough for a pop dot to fit through freely.  You may have to snip a little bit of the hole to make it larger.  Place one side of the pop dot to the back of his shirt.  Place the pants with the hole over the pop dot.  Place foam tape onto the back side of the shirt and adhere the extra shirt piece onto the pop dot and foam tape.  The legs should move freely at this point.  Decorate the rest of your Frankie as you desire.  Glue him into place inside your frame card.

To make the ghost tag, I used the scraps from my card above.  This is always a great way to use up your scraps and create an extra tag, card, etc. for future.   I die cut the ghost, spider and banner from the #6111 - Spooktacular set.  The bow from the #5811 - Gift card pocket die set and the spider webs from the #5604 - Halloween Journal die set.  I inked the ghost with black distress oxide ink and glued to a black die cut ghost to use as a shadow.  Decorated her with cute little wiggle eyes and a bow on top of her head.  I die cut two banners (one in black for the shadow) and wrote the word "spider!" across the white one.  I cut the bow from scraps and attached a spider web behind it and placed a spider on top.  Added a few more webs, spiders, ribbon on top and a little red heart and the tag is finished.

I hope you enjoyed my projects today.  Thanks for stopping by!  

Make sure to enter the challenge and show us your creation of "Along Came A Spider".  We love to see what you create!!

Happy Halloween!  Keep on Creating!

Copics used:  R20, T0, T2, T4

Dancing Santa Tag

 Happy Thursday AI Friends!

Have you seen the new Art Impressions Christmas release?  Wow, what a bundle!  Two cute stamp sets, a die set and two beautiful paper packs.  I decided to play with the #5931 Santa Puppet die set and boy, did I have fun making several versions of this Santa.  I have several more that aren't christmas so I'll save those for another post.  Stay tuned.

For my first Santa, I made him a dancing tag.  His body and legs move.  Check out the video below.

I partial die cut the pants (cut up to top of pant and then hand cut to make pant waist higher - see Pic 1).  I die cut all of the other pieces as well as an extra jacket and hands and decorated accordingly (see Pic 1 below).  The oval white piece on the right is a rough cut of the back of the head as you will need a base piece.  I then punched a hole in the three pieces as seen in Pic 1.  To put them together so that Santa dances, hold the leg piece where you want it to fall under the finished jacket.  Turn this over and adhere a foam dot into the hole (Pic 2).  Layer the extra jacket behind the back of the other jacket and adhere with the foam dot (see Pic 3).  Next hold the face over the front of the jacket, turn over and place another foam dot into the hole on the back of the jacket (see Pic 4).  Adhere the head base piece onto the foam dot in the jacket.   Your dancing Santa is ready for decorating with a pompom on the hat and a string to hang from the tree or present.

         Pic 1                                                                                                              

  

                                Pic 2

         Pic 3                                                                                                                

   

                                  Pic 4

      Pic 5

               

My other variations using the 5931 Santa Puppet die set:

Cut my Santa in half and made two tags, one of which using the 5132 Tag Stitched Die.  I popped up the chimney and placed the body of Santa upside down into the chimney.   The second tag, I scored the arms before putting the cuffs on and folded them in half, then put the cuffs on the outer side so he was wrapping his arms around the star.  I also added google eyes to him for fun.  I cut several snowflakes from the 4804 Snowflake dies and the icicles on the chimney are from the 5407 Birthday Cake gift card die.  The sentiment is from 5350 Animal Nativity Set and candy canes are from 5187 Gingerbread cubbies and 5457 Christmas Truck cubbies.

For the following tag I decided to make him a gnome santa.  I shortened his arms and legs and placed the hat lower on his face.  For his beard, I cut two but I cut one differently, by cutting half and then moved the die to stretch his beard and make it wider.  Another thought, you could use the 5223 Bookmark die and cut the top tab off to make a smooth beard.  He actually fits perfectly, but I wanted a fuller beard.  The die used for the santa sack is included in the 5931 Santa Puppet die set.  I believe it is actually to be used as the santa face base, however, I saw someone suggest a possible santa sack so I borrowed her great idea.  I wish I could remember who it was, so I could give her a shout out.   The candy canes are from the 5178 Gingerbread Cubbies and the banner is from 5722 Birthday Journal die set.  The sentiment is from the 5192 Penguin Cheer set.

Tres Chic Tags

 Happy Thursday AI Friends!

I have a couple of tags for you today that are inspired by the "Tres Chic" challenge going on this week.  Have you ever tried something out of your norm?  Every challenge expands your creativity and it's fun seeing where your imagination will go.  Plus it's extremely inspiring to others!  Please join us for this challenge.  Check out the tab above for details and a chance to win a free stamp set.  WhooHoo!! 

Both tags were made with many of the same die sets but produced quite different looks.

My first tag uses the #5367 Birdcage die.  I die cut it twice, once with black cardstock and one in a pattern paper.  I placed the black die cut behind the pattern piece slightly to the left to create a shadow look, plus to offset to give it more dimension.  I also used #5132 Tag Stitched Die and #5591 Journal Rectangle Frame die.  I inked all of the edges with Distress Oxide Vintage Photo.  The wood bird, heart, ribbon and flowers came from my stash that I have had for years.  Finally I can say I used them.  😄  

For my second tag, I used #5592 Harvest Journal Dies for the pumpkins, leaves and the "Hello Fall" die cuts.  I also used the #5132 Tag Stitched dies as well as the #5591 Journal Rectangle frame die.  Again, I inked all of the edges to give them a distressed look.  Placed a checked ribbon around the frame and at the top of the tag and, voila, tag is complete.  

I hope my tags today have inspired you to try something outside of your norm.  You never know where your imagination and creativity will go.  Have fun with it!!

Have a great day and keep creating!!